SAVE $100 Through September 1st
73-1/4 in. wingspan, 53-1/2 in. long, 848 sq. in. wing area, 88 oz. flying weight, 15 oz. per sq. ft. wing loading. Hundreds of modelers have had their first successful flying experience with a Telemaster, and many beginners have successfully flown a Telemaster 40 without assistance. Version 2 is new and improved, but with the same flying character you've come to love. It's now covered in opaque genuine Oracover, and the flaps are pre-cut and slotted with hinges. The construction quality has been improved and it's still set up for AXI OUTRUNNER power and the access hatch for the battery has a magnetic latch to make it really easy to swap out packs. An illustrated instruction manual is included showing how to assemble the model which will take about 6-8 hours to complete. For 5 channels: Ailerons (2 servos) Flaps (2 servos), Elevator, Rudder and Throttle."Learn to Aerotow with your Telemaster!"
Radio 1 - 5-Channel Transmitter/Receiver + Y-harness Servo Reverser. OR a 6-Channel Transmitter/Receiver 6 - Standard Servos 2 - 12" Servo Extension 2 - 24" Servo Extension Motor 1 - V2 Outrunner motor 1 - 13x8 Electric Prop Motor Controller 1 - 65A Brushless ESC w/SBEC 1 - Electronic Programmer Battery 1 - 4S 4000mAh 20C Lipo (optional to increase mAh or C) Charger 1 - AC/DC Charger Accessories Glue, Solder, Connectors, etc.
Everything You'll Need
Need to repair? Use White Ultracote(HANU870), and Flame Red Ultracote(HANU883)
6 Foot Telemaster Electro ARF V2 Manual PDF
*Please check your email for 10% discount code after filling out form below
[ Shopping Cart Software SearchFit v8.33.1 ]