Miss 2 Balsa Laser Cut Build Kit
This Miss 2 Balsa Plane Kit has all laser cut parts, sticks and sheet materials required to complete the airframe, 2-inch mains wheels, 3/4-inch tail wheel, hinge slotting jig, formed plastic canopy, formed plastic cowl, formed plastic side windows, formed mains landing gear, all linkage materials, control horns, full-sized rolled plans, and an illustrated assembly manual.A great Sunday flyer, designed on the old Free Flight days turned RC. This plane is very relaxing to fly and is a great way for anyone looking to start enjoying this hobby to the fullest.
Motor 1 - ERCBL480s480 Size Brushless Outrunner, 1000Kv ESC 1 - ERCE025 eRC 25A Brushless Programmable ESC w/BEC Servos 2 - ERCS900 eRC 9 Gram MG Precision Micro Servo Battery 1 - YTB21002 2100mAh 2S 7.4V 20C LiPo Battery Charger 1 - HRC44165 X1+ AC Single Port AC/DC Charger Charger Adaptor 1 - GPMM3148 Charge Lead Banana Plugs/Deans Male Covering Material (choose color) 1 - Cover Choices Choose one Sealing Iron 1 - HAN101 450 Degree Sealing Iron Sock 1 - HAN141 Sealing Iron Sock Covering Heat Gun 1 - HAN1001000 Watt Heat Gun Glue - Thin 1 - BSI102Insta-Cure Super Thin CA, 1 oz. Glue - MED 1 - BSI106Insta-Cure Gap Filling CA, 1/2 oz. Z-ends Teflon Tubing 1 - ZAP108Z-Ends & Teflon Tubing, 10 Epoxy - 5 Minute 1 - BSI201Quik-Cure 5 Minute Epoxy, 4.5 oz. Builders Tool Box 1 - HLT850Airplanes Modelers Tool Chest Accessories Sand paper, quick clamps, blue painting tape ... patience.
Please call our support line toll free: (866) 512-1444 for assistance with this product
*Please check your email for 5% discount code after filling out form below