This airplane can be built as glow or electric powered.
Construction: Balsa and ply, pre-built, pre-covered wing, fuselageand tail sections, enlarged control surfaces for better responseat slow speeds, fully sheeted fuselage between canopy and fin forsmoother appearance and greater strengthWing: Two-piece bolt-onAileron Control: Dual servoCovering: High quality premium polyester self adhesiveCanopy: Clear plasticCowl: Painted fiberglass, new designed is streamlined for sleekermore aggressive appearanceLanding Gear: One-piece prebent aluminum, main 2.5" (63.5mm) foamwheels, 1" (25.4mm) rubber tailwheelWheel Pants: Painted fiberglassHatch: Wooden, removable for easy accessMotor Mount: Preassembled plywoodEngine Mount: Two-piece composite plasticFuel Tank: 6oz (180cc) approximate
Pre-built and covered wood wings, fuselage and tail assembliesWheels and hardwareInstruction manual
Glow Power-Engine: .40-.46 cu. in. two-stroke or .40-.54 four-strokeFuel glow starter, prop building and field equipmentElectric Power-Brushless Motor: 500-800 watt (800-1000 kv)Electronic Speed Control: To match selected motorLiPo Battery: 3-4S 4000-5000mAhBattery Charger: Compatible with selected batteryLiPo charging bagRadio: 4 channel with 5 servos (glow) or 4 channel with 4 servos forelectric6" (152mm) Servo Extensions: Two for aileron servosY Harness: For aileron servos
Length: 47.5" (1206mm)Wing Span: 54" (1372mm)Wing Area: 585 sq in (37.7 sq dm)Flying Weight: 5 - 5.5lbs (2268 - 2495g)Wing Loading: 19.7 - 21.7 oz/sq ft (60 - 66 g/sq dm)Airfoil: Semi-symmetricalConfiguration: Low wingCenter of Gravity (CG): 2-3/4 - 3-1/2" (70 - 89mm) back from theleading edge of the wing at the fuselageControl Throws Low Rates High RatesElevator (up & down): 5/8" 15-50% expo 1" 50-70% expoAilerons (up & down): 5/8" 15-50% expo 1" 50-70% expoRudder (right left): 3/4" 15-40% expo 1-1/2" 50% expo
*Please check your email for 10% discount code after filling out form below
[ Shopping Cart Software SearchFit v8.33.1 ]